Home › Services › TV Unit Design

TV Unit Design in Noida, Greater Noida and Ghaziabad

TV units and living room wall panelling for homes in Noida, Greater Noida and Ghaziabad, from ₹45,000. Built in BWP-grade plywood at our own unit, with cable routing planned before anything is cut rather than drilled in afterwards.

What a TV Unit Costs

Price follows the width of the wall being treated and how much of it is panelled rather than left plain. A simple wall-hung console with a back panel starts at ₹45,000. A full-wall treatment with storage, open shelving and integrated lighting runs considerably higher.

Wall-Hung or Floor Standing

Wall-hung reads lighter and makes the floor easier to clean, which matters more than it sounds in a home with a robot vacuum or small children. Floor-standing gives more storage volume and does not depend on the wall being solid. In most NCR flats the TV wall is a brick partition and takes wall-hung fixing without difficulty.

Cable Management Decided First

Almost every retrofitted TV unit has a visible cable bundle somewhere. Routing conduit behind the panel before it is fixed costs almost nothing; adding it afterwards means removing the panel. We mark the socket positions, set-top box location and HDMI runs on the drawing before manufacture.

Panelling Without Making the Room Smaller

A dark full-height panel on a wall opposite a small window makes a living room feel closed. Where light is limited we panel to two-thirds height, keep the finish light, and use the remaining wall for paint. The room reads larger and the unit still anchors it.

Materials We Specify for TV Unit Design

Carcasses are BWP-grade plywood, never MDF or particle board, because NCR humidity is hard on engineered boards. Hinges and channels are Hettich, Häfele or Blum depending on shutter weight, and the brand is printed on the quotation rather than described as "branded hardware". Edge banding is 2mm on exposed edges. See our guides to choosing plywood and comparing hardware.

Sizing the Unit to the Screen

The console should read wider than the television, not narrower, or the screen looks like it is overhanging a shelf. As a rule the unit runs at least 300mm wider on each side. Screen height matters too: the centre of the display should sit roughly at eye level from the sofa, which in most living rooms puts the console top around 500 to 550mm off the floor.

Ventilation Behind the Panel

Set-top boxes, consoles and soundbar amplifiers all produce heat, and a sealed cabinet shortens their life. We leave a ventilation gap at the back of every closed compartment and specify perforated or open-backed sections where equipment sits. It costs nothing at the drawing stage and cannot be added later without cutting.

Finishes That Hide Dust

A television wall in NCR collects dust faster than anything else in the room. High-gloss acrylic shows every particle and every fingerprint from the remote. Matte laminate, textured PU or a wood-grain veneer hide it, and all three photograph better under the mixed lighting most living rooms actually have.

How We Work

1. Free measured survey. Real dimensions and constraints recorded before anything is priced.
2. 3D design. Shown as it will be built. Revisions here cost nothing.
3. Itemised quotation. Board grade, hardware brand and finish code named line by line.
4. Manufacturing. Produced at our own unit in Greater Noida West.
5. Installation and snagging. Defects listed in writing and closed before the final payment.

Where We Deliver TV Unit Design

Noida across all sectors, Greater Noida and Noida Extension, and Ghaziabad including Indirapuram, Vaishali and Vasundhara. City pages with local rates: interior designer in Noida, interior designer in Greater Noida, interior designer in Ghaziabad.

Related Services

Wardrobe Design · False Ceiling Design · Turnkey Interior Contractor. Also see the modular kitchen page, the full services list, or interior design cost in Noida for rates across every service.

TV Unit Design — Frequently Asked Questions